Cisco VG248 - Gateway Software Configuration Manual page 107

Chapter 6 Troubleshooting the VG248
Table 6-2 Network and System Errors and Warnings Explanation (continued)
System Error
FTP Partial
download
aborted
OS Ethernet failed
to start
OS Incorrect
password
entered
SNMP Attempt to use
Get with
invalid
community name
" "
<name>
SNMP Attempt to use
Set with
invalid
community name
" "
<name>
SNMP Received
invalid packet
OL-1209-02
Explanation
An attempt to download
a file onto the VG248
was interrupted before
the entire file was
transferred.
The resulting partial file
has been deleted from
the filing system on the
VG248.
The Ethernet cable is
not properly connected
to the VG248 or to the
hub or switch.
A user attempted to use
a telnet, console, or FTP
connection to the
VG248 but entered an
incorrect password.
The VG248 received an
SNMP request with an
invalid read-only
community name
(password).
The VG248 received an
SNMP request with an
invalid read-write
community name
(password).
The SNMP server
received an invalid
SNMP request.
Cisco VG248 Analog Phone Gateway Software Configuration Guide
Troubleshooting Software Errors
Action
Reattempt the file transfer.
Check the Ethernet cable and reconnect it to
the VG248 and the hub or switch. If error
persists, replace cable.
Check the passwords and verify that you are
using the correct one.
Change the password if you suspect an
unauthorized login attempt. Refer to the
"Configuring Passwords" section on
page 2-11 for details.
Check the community string setting on the
VG248 and ensure that your network
management system has the correct
password. Refer to the
Settings" section on page 2-12
Check the community string setting on the
VG248 and ensure that your network
management system has the correct
password. Refer to the
Settings" section on page 2-12
Verify that your network management
system is set up properly.
"Configuring SNMP
for details.
"Configuring SNMP
for details.
6-9