Free-Standing And Desktop Mounting Of Multiple Switches; Removing An Ac-Powered Summit Switch From A Rack (Models Other Than Summit X650 Series; Installing And Removing Summit Dc-Powered Switches - Extreme Networks Summit X250e-24t Hardware Installation Manual

5 Insert the switch into the rack.
Take care to load the rack so that it is not top-heavy. Start from the bottom and work up.
●
Do not cover vents that would restrict airflow. Leave a half-rack space between the units for
●
adequate ventilation.
6 Secure the switch with suitable screws (not provided).
7 Connect the switch to the redundant power supply (if applicable). For instructions on installing and
connecting redundant power supplies, see
8 Connect the power cables.
For AC-powered units, connect the power cable to the AC power connector on the back of the
●
switch. Then connect the power cable to an AC power socket.
For information about DC-powered units, see
●
Switches" on page

Free-Standing and Desktop Mounting of Multiple Switches

Summit family switches are supplied with four self-adhesive rubber pads. Apply the pads to the
underside of each device by placing the pad in the marked area at each corner of the switch, ensuring
that all corners aligned. You can safely place up to four Summit family switches on top of one another.
Removing an AC-Powered Summit Switch from a Rack (Models
Other than Summit X650 Series)
To remove an AC-powered Summit switch from a rack:
1 Remove power from the switch.
Unplug the power cables from the from the wall outlets first and then from the switch.
2 Disconnect the Summit switch from the redundant power supply (if applicable).
3 Loosen and remove the four screws holding the switch in place in the system rack.
4 Carefully remove the switch from the rack and place it on a secure, flat surface.
NOTE
For information about DC-powered units, see
For information about removing a Summit X650 series switch from a rack, see
Switch from a Two-Post Rack" on page

Installing and Removing Summit DC-Powered Switches

This section provides additional details about installing or removing the following Summit DC-powered
switches:
Summit X250e-24tDC
●
Summit X250e-24xDC
●
Summit X250e-48tDC
●
Summit X450a-24tDC
●
Summit Family Switches Hardware Installation Guide
Chapter 2, "Summit Power Supplies."
99.
"Removing a Summit DC-Powered Switch from a Rack" on page
119.
"Installing and Removing Summit DC-Powered
"Removing a Summit X650 Series
103.
99