Extreme Networks Summit X250e-24t Hardware Installation Manual page 107

5 At the front of the switch, place a front mounting bracket against each side of the switch, in front of
the ventilation openings in the side of the switch
Make sure there is space between the bracket and the ventilation openings.
Figure 75: Positioning the Front Mounting Brackets—Two-Post Rack
6 Using the provided screws, attach each front bracket to the switch
7 Slide the switch back in the rack until the front mounting brackets are against the front of the rack
post (Figure 76).
Make sure that the ventilation holes in the side of the switch are within the open channel of the rack
post.
Figure 76: Securing the Front Mounting Brackets to the Rack
8 Using mounting screws suitable for your equipment rack, secure the mounting brackets to the front
of the rack post.
Summit Family Switches Hardware Installation Guide
(Figure 75)
SH_099
(Figure
SH_100
75).
107