Extreme Networks Summit X250e-24t Hardware Installation Manual page 120

Installing Summit Family Switches
Figure 91: Removing the Front Mounting Screws from a Two-Post Rack
4 Remove the screws holding the front mounting brackets to the sides of the switch, and set the
mounting brackets aside.
5 Support the front and back of the switch as you slide the switch back, off the rear mounting
brackets, and out of the rack
Set the switch on a secure work surface.
Figure 92: Removing the Switch from a Two-Post Rack
120
(Figure 92).
SH_100
SH_101
Summit Family Switches Hardware Installation Guide