G8Xi Module - Extreme Networks Alpine 3802 Hardware Installation Manual

G8Xi Module

Figure 152 shows the G8Xi module.
Figure 152: G8Xi module
Module status LEDs
Gigabit Ethernet ports
with status LEDs
The G8Xi module has eight unpopulated GBIC-based Gigabit Ethernet ports. All Gigabit Ethernet ports
on these modules use standard GBIC connectors and support 1000BASE-SX, 1000BASE-LX,
1000BASE-LX70, and 1000BASE-ZX.
The default configuration of the G8Xi module is as follows. All ports:
• Are added to the default VLAN as untagged.
• Inherit the properties of the default VLAN (protocol type, VLANid, and so forth).
• Operate in auto-negotiation mode.
GBIC Ports
The G8Xi module supports any of the following GBICs:
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LX70
• ZX GBIC
• LX100 GBIC
• UTP GBIC
Table 54 describes the media types and associated maximum distances for each GBIC type.
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
51032
STATUS DIAG
1
AMBER
=
ACTIVITY
GREEN
=
LINK OK
FLASHING
GREEN
=
DISABLED
2
3
4
5
6
7
8
XM_G8Xi
Configuring I/O Modules
267