G8Ti Module - Extreme Networks Alpine 3802 Hardware Installation Manual

BlackDiamond 6800 Series I/O Modules

G8Ti Module

Figure 151 shows the G8Ti module.
Figure 151: G8Ti module
Module status LEDs
100/1000 Mbps ports
with status LEDs
and speed LEDs
XM_G8Ti
The G8Ti module has eight autosensing 100/1000BASE-T ports that use standard RJ-45 connectors. The
default configuration of the G8Ti module is as follows. All ports:
• Are added to the default VLAN as untagged.
• Inherit the properties of the default VLAN (protocol type, VLANid, and so forth).
• Operate in auto-negotiation mode.
LEDs
The G8Ti module has the following LEDs:
• Module status
• Port status
• Port speed
For information about the LEDs and their activity on the G8Ti module, see "I/O Module LEDs" on
page 293.
266 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide