Blackdiamond 6816 Switch - Extreme Networks Alpine 3802 Hardware Installation Manual

BlackDiamond 6800 Series Switch Overview

BlackDiamond 6816 Switch

The BlackDiamond 6816 switch consists of the following components:
• One 20-slot chassis with backplane
• Sixteen I/O module slots, labeled slots 1 through 16
• Four MSM64i slots, labeled slots A through D
• Four power supply bays (accessed from the front of the unit)
• Two hot-swappable fan trays containing nine individual fans, accessed from the front of the switch
• Two side mounted handles for lifting the chassis
• One electrostatic discharge (ESD) wrist strap connector
NOTE
The BlackDiamond 6816 chassis supports only modules with an "i" or "3" in their name, such as the
3
G16X , and power supplies with an "i" in their name, such as the ipower 220 VAC.
The BlackDiamond 6816 switch can support up to the following number of ports and types of port
configurations:
• 1344 switched 10BASE-T/100BASE-TX Ethernet ports
• 448 switched 100BASE-FX Fast Ethernet ports
• 192 switched Gigabit Ethernet ports
• 256 switched 1000BASE-X oversubscribed ports
• 360 switched 10/100/1000BASE-T oversubscribed ports
• 60 OC3 PoS ports
• 60 OC3 ATM ports
• 30 OC12 PoS ports
NOTE
PoS and ATM modules installed in a BlackDiamond chassis require at least one BlackDiamond
Ethernet I/O module also installed in the chassis in order to operate correctly.
Figure 118 shows the front view of the BlackDiamond 6816 chassis, fully populated with 4 MSMs and
16 I/O modules.
218 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide