1-Port 10-Gigabit Ethernet Spa Overview - Cisco ASR1004 - ASR 1004 Modular Expansion Base Hardware Installation Manual

1-Port 10-Gigabit Ethernet SPA Overview

The 4-Port and 8-Port Fast Ethernet SPA supports automatic MDI/MDIX crossover at all speeds of
operation allowing the SPA to work with straight-through and crossover Ethernet cables. Depending on
your RJ-45 interface cabling requirements, use the pinouts in
Figure 3-9
Hub or LAN switch
Figure 3-10
Router
3 TxD+
6 TxD–
1 RxD+
2 RxD–
1-Port 10-Gigabit Ethernet SPA Overview
There are two types of 1-Port 10-Gigabit Ethernet SPA, the SPA-1X10GE-L-V2, which supports the
10GE LAN-PHY mode of operation at an optical interface bit rate of 10 Gbps, and the
SPA-1X10GE-WL-V2, which supports both the 10GE LAN-PHY mode of operation (at 10 Gbps) and
the 10GE WAN-PHY mode of operation (at 9.2946 Gbps).
The following sections describe the 1-Port 10-Gigabit Ethernet SPA:
•
•
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
3-14
Straight-Through Cable Pinout, RJ-45 Connection to a Hub or Repeater
Ethernet port
3 TxD+ 3 RxD+
6 TxD– 6 RxD–
1 RxD+ 1 TxD+
2 RxD– 2 TxD–
Crossover Cable Pinout, RJ-45 Connections Between Routers
Router
3 TxD+
6 TxD–
1 RxD+
2 RxD–
1-Port 10-Gigabit Ethernet SPA LEDs, page 3-15
1-Port 10-Gigabit Ethernet SPA XFP Optical Transceiver Modules, Connectors, and Cables,
page 3-16
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
Figure 3-9 and Figure 3-10.
OL-14126-12