10-Port Gigabit Ethernet Spa Overview; 10-Port Gigabit Ethernet Spa Leds - Cisco ASR1004 - ASR 1004 Modular Expansion Base Hardware Installation Manual

10-Port Gigabit Ethernet SPA Overview

See the
SFP module options, module specifications, and cabling specifications.
For CWDM and DWDM SFP module specifications, see the
Gigabit Ethernet SPAs" section on page
10-Port Gigabit Ethernet SPA Overview
The following sections describe the 10-Port Gigabit Ethernet SPA:
•
•
•
•

10-Port Gigabit Ethernet SPA LEDs

The 10-Port Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port on the SPA, and
one STATUS LED, as shown in
Figure 3-19
1
Table 3-14
Table 3-14
LED Label
A/L
STATUS
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
3-24
"SFP Module and Cabling Specifications for Gigabit Ethernet SPAs" section on page 3-25
10-Port Gigabit Ethernet SPA LEDs, page 3-24
10-Port Gigabit Ethernet SPA Connectors, page 3-25
SFP Module and Cabling Specifications for Gigabit Ethernet SPAs, page 3-25
CWDM and DWDM SFP Modules for Gigabit Ethernet SPAs, page 3-29
10-Port Gigabit Ethernet SPA Faceplate
1
A/L (Active/Link) LED
describes the 10-Port Gigabit Ethernet SPA LEDs.
10-Port Gigabit Ethernet SPA LEDs
Color
Off
Green
Amber
Off
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
3-29.
Figure 3-19.
2
STATUS LED
State Meaning
Off Port is not enabled.
On Port is enabled and the link is up.
On Port is enabled and the link is down.
Off SPA power is off.
"CWDM and DWDM SFP Modules for
for
2
OL-14126-12