1-Port 10-Gigabit Ethernet SPA Overview
Table 3-24
SFP Modules
SFP-GE-Z
1. Multimode fiber (MMF) only.
2. Dispersion-shifted single-mode fiber-optic cable.
The 1000BASE-ZX SFP modules provide an optical power budget of 21.5 dB. You should measure your
Note
cable plant with an optical loss test set to verify that the optical loss of the cable plant (including
connectors and splices) is less than or equal to 21.5 dB. The optical loss measurement must be performed
with a 1550-nm light source.
1-Port 10-Gigabit Ethernet SPA Overview
The following sections describe the 1-Port 10-Gigabit Ethernet SPA:
•
•
1-Port 10-Gigabit Ethernet SPA LEDs
The 1-Port 10-Gigabit Ethernet SPA has two LEDs, an ACTIVE/LINK LED for the port and a STATUS
LED, as shown in
Figure 3-16
1
Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide
3-32
SFP Module Port Cabling Specifications (continued)
Wavelength
(nm)
1550
1-Port 10-Gigabit Ethernet SPA LEDs, page 3-32
1-Port 10-Gigabit Ethernet SPA XFP Optical Transceiver Modules, Connectors, and Cables,
page 3-33
Figure
3-16.
1-Port 10-Gigabit Ethernet SPA Faceplate
1
ACTIVE/LINK LED
Chapter 3
Overview: Cisco ASR 14000 Series Router Shared Port Adapters
Core Size
Fiber Type
(micron)
SMF
9/10
2
SMF
8
2
STATUS LED
Modal
Bandwidth
Maximum
(MHz/km)
Cable Distance
—
49.7 miles
(80 km)
—
62.1 miles
(100 km)
SPA-1X10GE-L-V2
2
OL-17456-01