Configuring Vtp; Configuring Vtp Global Parameters - Cisco 4500M Software Manual

Configuring VTP

Configuring VTP
The following sections describe how to configure VTP:
•
•
•
•
•

Configuring VTP Global Parameters

The following sections describe configuring the VTP global parameters:
•
•
•
Configuring a VTP Password
To configure the VTP password, perform this task:
Command
Switch# [no] vtp password
password_string
This example shows how to configure a VTP password:
Switch#vtp password WATER
Setting device VLAN database password to WATER.
Switch#show vtp password
VTP Password:WATER
Switch#
Enabling VTP Pruning
To enable VTP pruning in the management domain, perform this task:
Command
Step 1
Switch# [no] vtp pruning
Step 2
Switch# show vtp status
Software Configuration Guide—Release 12.2(25)EW
27-6
Configuring VTP Global Parameters, page 27-6
Configuring the Switch as a VTP Server, page 27-7
Configuring the Switch as a VTP Client, page 27-8
Disabling VTP (VTP Transparent Mode), page 27-9
Displaying VTP Statistics, page 27-10
Configuring a VTP Password, page 27-6
Enabling VTP Pruning, page 27-6
Enabling VTP Version 2, page 27-7
Chapter 27
Purpose
Sets a password for the VTP domain. The password can
be from 8 to 64 characters.
Uses the no keyword to remove the password.
Purpose
Enables VTP pruning in the management domain.
Use the no keyword to disable VTP pruning in the
management domain.
Verifies the configuration.
Understanding and Configuring VTP
OL-6696-01