Cisco 4500M Software Manual page 148

Configuring and Using the Network Assistant
This example shows how to configure the authentication login to use local passwords and to verify the
configuration:
Switch(config)# ip http authentication local
Switch(config)# end
Switch# show running-config | include http
ip http server
ip http authentication local
This example illustrates the sample configuration files for the cluster command switch candidate:
Current configuration : 2481 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service compress-config
!
hostname Switch
!
!
vtp domain switch
vtp mode transparent
ip subnet-zero
!
cluster run
!
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
power redundancy-mode redundant
!
!
!
vlan internal allocation policy ascending
!
vlan 17,100,110,117,120,200
!
interface FastEthernet1
ip address 4.4.4.4 255.255.255.0
speed auto
duplex auto
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface GigabitEthernet3/1
no switchport
ip address 3.3.3.3 255.255.255.0
!
interface GigabitEthernet3/3
!
interface GigabitEthernet3/4
!
interface GigabitEthernet3/5
!
interface GigabitEthernet3/6
!
interface GigabitEthernet3/7
!
Software Configuration Guide—Release 12.2(25)EW
9-6
Chapter 9 Configuring Switches with Web-based Tools
OL-6696-01