Installing And Removing Field-Replaceable Units; Installing And Removing The Compactflash Disk; About Compactflash Disks - Cisco 7301 Installation And Configuration Manual

Configuration guide
Table of Contents

Advertisement

Installing and Removing the CompactFlash Disk

Installing and Removing the CompactFlash Disk

Figure 4-1
1
To remove the CompactFlash Disk, push the ejector button to the left of the CompactFlash Disk slot.
Step 1
After the CompactFlash Disk is ejected, remove it from the CompactFlash Disk slot.
Step 2
Note
With the vendor name and memory size facing up and the arrow pointing toward the router, gently insert
Step 3
the CompactFlash Disk in the CompactFlash Disk slot. If the CompactFlash Disk does not completely
insert into the slot, remove it and turn it over, and reinsert it; it was probably upside down. The
CompactFlash Disk protrudes a bit from the chassis when it is completely inserted.
This completes the CompactFlash Disk installation and removal procedure.

About CompactFlash Disks

For complete information about using a CompactFlash Disk, see
Disk."
For further installation procedures including rack-mounting or general workbench installation, see
Chapter 2, "Rack-Mounting, Tabletop Installation, and Cabling,"
Configuring the Router."
Cisco 7301 Installation and Configuration Guide
4-2
Installing and Removing the CompactFlash Disk
1
ON SO LE
10 0- 24 0V
24 V= 9A ,
AL AR M
CO MP AC T
FL AS H
ST AT US
CompactFlash Disk insertion
The CompactFlash Disk is keyed to prevent it being inserted incorrectly.
The larger the CompactFlash Disk size, the longer the system boot time.
The CompactFlash Disk supports online insertion and removal (OIR).
Use the CompactFlash Disk to store your configuration files and Cisco IOS software image.
Chapter 4
, 2A , 50 /6
0 Hz
48 - 60 V=
5A
2

Installing and Removing Field-Replaceable Units

2
ON SO LE
10 0- 24 0V
, 2A , 50 /6
24 V= 9A ,
48 - 60 V=
AL AR M
CO MP AC T
FL AS H
ST AT US
CompactFlash Disk ejector button and
removal
Appendix B, "Using the CompactFlash
and
Chapter 3, "Starting and
0 Hz
5A
OL-5418-07

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vam2 - 7301 router security bundle

Table of Contents