Chapter 1 Cisco 7301 Overview; Cisco 7301 Features - Cisco 7301 Installation And Configuration Manual

Cisco 7301 Features

Cisco 7301 Features
Each Cisco 7301 router consists of the following features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco 7301 Installation and Configuration Guide
1-2
Small form-factor—One rack-unit (RU) high with stacking capability:
1.73 in. x 17.3 in. x 13.87 in. (4.39 cm x 43.9 cm x 35.23 cm). The weight is approximately 10.5 lbs
(4.76 kg).
Three native Gigabit Ethernet interfaces—six ports:
– Three optical fiber Gigabit Ethernet (1000 Mbps) ports that use a small form factor pluggable
(SFP) Gigabit Interface Converter (GBIC) modules with LC connectors
Three Gigabit Ethernet (10/100/1000 Mbps) ports with RJ-45 connectors (any three ports are
–
available at any one time)
Both 25-MHz and 50-MHz port adapter operation
A 64- or 128-MB CompactFlash Disk
SFP GBIC modules: Three Gigabit Ethernet SX, LH, ZX module options, 1000BASE-T SFP
(copper) module, and several coarse wavelength-division multiplexing CWDM SFP modules
Power supplies:
Single or dual AC power supplies
–
Single 24V DC power supply
–
Dual 48V DC power supply
–
BCM 1250 integrated dual processors that operates at an internal clock speed of 700 MHz
512-KB Boot ROM
32-MB Boot Flash
Three SDRAM memory options: 256 MB, 512 MB, and 1 GB
Auxiliary port
Console port
Online insertion and removal (OIR)—Allows you to add, replace, or remove port adapters with
minimal interruption of the system
Environmental monitoring and reporting functions—Allow you to maintain normal system
operation by resolving adverse environmental conditions prior to loss of operation
Downloadable software—Allows you to load new images into Flash memory remotely, without
having to physically access the router, for fast, reliable upgrades
Front-to-back airflow—Allows you to mount the router from either front or back into 19-inch
two-post racks and 21–23-inch four-post racks
Chapter 1 Cisco 7301 Overview
OL-5418-07