Field Replaceable Units; Fiber And Interface Cable Management - Cisco ASR 9000 series Reference Manual

Rack-Mounting Considerations
•
•
•
•
The line card slots are dedicated only to line cards; RSP cards cannot occupy these slots. The RSP slots
are dedicated RSP slots; line cards cannot occupy these slots. A keying mechanism keeps line cards from
entering RSP slots, and RSP cards from entering line card slots. These keying pins engage before the
card alignment pins engage.

Field Replaceable Units

The following components are field replaceable units (FRUs):
•
•
•
•
•
•
•
•
•
The backplane and BPID are not field replaceable units.
Note

Fiber and Interface Cable Management

Card interface cables are managed in the front of the chassis using a cable management tray, as shown
in Figure
Cisco ASR 9000 Aggregation Services Router Overview and Reference Guide
1-8
D R A F T — C I S C O C O N F I D E N T I A L
Cisco ASR 9006 Router - four Ethernet line cards
–
One backplane
One Backplane Identification (BPID) board
Two fan controller boards
Power shelves:
Cisco ASR 9010 Router - one or two AC power shelves (in AC-powered systems), or one or two
–
DC power shelves (in DC-powered systems)
Cisco ASR 9006 Router - one AC power shelf (in AC-powered systems), or one DC power shelf
–
(in DC-powered systems)
Chassis
All cards
Power modules
Fan trays
Air filters
Line card and RSP blank fillers
Compact flash disk
SFP and XFP modules
Optional card cage door
1-7.
Chapter 1 Overview and Physical Description
OL-17501-01