Troubleshooting - TRENDnet TV-IP600 User Manual

Hide thumbs Also See for TV-IP600:

Table of Contents

C. Troubleshooting

I cannot access the Camera from a web browser?

A1:

The possible cause might by that the IP address of the Camera is already being used by

another device. To correct the possible problem, you need to disconnect the Camera from

the network first. Then run the PING utility (follow the instructions in Appendix B – PING

your IP Address for more information).

A2:

Another possible reason is the IP Address is located on a different subnet. To identify is this

is the problem, run the PING utility (follow the instructions in Appendix B – PING your IP

Address for more information). If the utility returns "no reply" message or similar, it is

possible that your Camera is on a different subnet from your computer. Carry out the

following:

A2.1: Open the Control Panel by clicking Start > Control Panel as shown below:

TV-IP600/W Wireless Network Camera

Table of Contents

Tv-ip600w