TRENDnet TV-IP600 User Manual page 99

Click the Properities button.
Double-click the Internet Protocol (TCP/IP) item and check that the first 3 bytes of your
computer's IP address correspond with the first 3 bytes of the Camera's.
If the Camera is situated on a different subnet than your workstation, you will not be able to
configure the Camera. Therefore, you must connect to the Camera from a PC on the same subnet
to configure the Camera settings.
A3: The wireless connection might be faulty. If your Camera is operating in Ad-Hoc mode make
sure the Camera wireless channel and SSID are set to match the PC/Notebook and the
Camera must match with the Access Point's SSID.
TV-IP600/W Wireless Network Camera
96