TRENDnet TV-IP312 User Manual page 64

Factory Reset

Click Reset to restore all factory default settings for the camera.
System Reboot

Click Reboot to restart the camera just like turning the device off
and on. The camera configuration will be retained after rebooting.
Configuration

You can save your camera configuration as a backup file on your
computer. Whenever you want to resume the original settings,
you can restore them by retrieving the backup file.
- Backup: Click Get the backup file to save the current
configuration of the camera.
- Restore: Click Browse to locate the backup file and then click
Restore.
Update Firmware

This item displays the current firmware version. You can upgrade
the firmware for your camera once you obtained a latest version
of firmware.
- Select the firmware: Click Browse to locate the backup file
and then click Update.
NOTE
Make sure to keep the camera connected to the power source
during the process of upgrading firmware. Otherwise, the
camera might be damaged because of failure of upgrading
firmware.
- 63 -