TRENDnet TV-IP312 User Manual page 39

- Static IP: Select this option to assign the IP address for the
camera directly. You can use IPSetup to obtain the related
setting values.
IP
Subnet Mask
Default Gateway
Primary/
Secondary DNS
- PPPoE: Select this option when you use a direct connection via
the ADSL modem. You should have a PPPoE account from your
Internet service provider. Enter the User Name and Password.
The camera will get an IP address from the ISP as starting up.
NOTE
Once the camera get an IP address from the ISP as starting up,
it automatically sends a notification email to you. Therefore,
when you select PPPoE as your connecting type, you have to
set up the email or DDNS configuration in advance.
DDNS Setting

With the Dynamic DNS feature, you can assign a fixed host and
domain name to a dynamic Internet IP address. Select the Enable
option to enable this feature. Then, select the Provider from the
pull-down list and enter the required information in the Host
Name, User Name, and Password boxes. Please note that you
have to sign up for DDNS service with the service provider first.
UPnP

Enter the IP address of the camera. The default
setting is 192.168.10.30.
Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Enter the Default Gateway of the camera. The
default setting is 192.168.10.1.
DNS (Domain Name System) translates domain
names into IP addresses. Enter the Primary DNS
and Secondary DNS that are provided by ISP.
- 38 -