Speaker Connector: Connects a external active speaker to the
-
camera.
Power Connector: Connects the AC power adapter to supply
-
power to the camera.
LAN Port: It is used to connect the network RJ-45 cable, which
-
supports the NWay protocol so that the camera can detect the
network speed automatically.
Reset Button: Reset will be initiated when the reset button is
-
pressed once. The power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to
light up. Release the reset button and the Power LED will begin to
flash.
- 9 -