TRENDnet TV-IP312 User Manual page 41

Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the
users within a certain range of IP addresses to access the camera.
Start/End IP Address

Assign a range of IP addresses that are not allowed to access the
camera by entering the Start IP address and End IP address. When
you are finished, click Add to save the range setting. You can
repeat the action to assign multiple ranges for the camera.
For example, when you enter 192.168.10.50 in Start IP Address
and 192.168.10.80 in End IP Address, the user whose IP address
located within 192.168.10.50 ~ 192.168.10.80 will not be allowed
to access the camera.
Deny IP List

The list displays the range setting(s) of IP addresses that are not
allowed to access the camera. To clear the setting, select a range
of IP addresses from the list and click Delete.
- 40 -