Table of Contents
Advertisement
4.6 Computers – Miscellaneous Settings for
Video Servers
After any setting change, click the
Apply Setting
click
to apply new settings to TK-IP101 immediately.
Select the KVM Port Number : Select the target KVM port to which your target
computer is connected. You can just select from the drop down combo box for the
target port number to be designated with various port specific settings on this page,
such as computer name, the scanning and alarm options, power-on and power-off
commands.
You can use the drop-down combo box or use the Previous and the Next button to
select KVM port for setting.
Computer Name
Enter a character string (32 characters max) : Designate the computer name (in
this case, it is Redhat Linux) for the computer you will connect to that specific port
(in this case, it is port 6) on the conventional KVM Switch behind TK-IP101. A
Maximum length of 32 characters for each name is allowed. The computer names
you specify here for each port will appear all together in the Select Computer Box
when logging in IP Viewer.
Computer Scanning and Alarms
Do not include in scanning process : If you do not want any KVM port (in this case, it
is port 6) to be included in TK-IP101 auto-scanning, you should check this option to
exclude it.
Do not generate alarm : If you do not want the scanning process to generate alarm
or SNMP messages for this computer then you should check this option to exclude it.
Submit
button to save new setting to the TK-IP101 database, and then
-
-
54
Advertisement
Table of Contents
