Table of Contents
Advertisement
e.g. If you want to turn off port 3 on bank 1. Then you have to enter:
/F013\
Power on command: /Obbp\
O: ON
bb: 2-digit bank number on which the target port resides.
p: 1-digit target port number.
e.g. If you want to turn on port 3 on bank 1. Then you have to enter:
/O013\
Delay
Here you should specify the delay time between the sending of power-down and power-on commands to
complete a power cycling. A power cycling is processed only if you have selected Restart Computer into
the Alarm page. By default this delay is 5 seconds.
Important Note: To remotely power on/ off this computer from the Windows or the Java Viewers,
Power On/Power Off
switch to this computer and then click
in the Viewer menu. The command
specified here will be sent automatically by TK-IP101 to the TK-RP08.
After you have made all modifications, click Store Settings to save your settings and then hit Apply Settings/Restart
Servers to validate these new settings. Every change you have made on this page will NOT apply until you hit Apply
Settings/Restart Servers! (Also refer to TK-IP101 User Guide, Section 4.10, KVM Server/Computers – Port and IP
settings)
Verify the remote Power Control function via Viewer Quick Menu
Step 7. On a client computer that has been installed with the TK-IP101 viewer program, you can then
make a viewer connection to the TK-IP101.
For viewer connection details, please refer to Chapter 4, Unit Management over a secure https browser connection.
Step 7-1. To power off a specific computer, first you have to switch to that computer desktop by
clicking its icon in the Select Computer Box to switch to whatever PC you WAN to perform power
on/off from remote.
-
-
92
Advertisement
Table of Contents
