Table of Contents
Advertisement
The NumLock test is to send a NumLock signal to the computer, and the computer
normally should return a response immediately so that the NumLock LED indicator
on the keyboard will be lit to indicate the success of the test.
The failure of a NumLock test indicates at least a keyboard failure to respond to this
NumLock signal, or it might be due to bigger problem such as system failure, or
simply a powered-off state.
Enable Alarm: Check this option to enable TK-IP101 to respond to specific alarm
triggering events.
Restart Computer: Check this option to restart computer upon specific alarm
triggering events.
Send an e-mail: Check this option to send an alert e-mail upon specific alarm
triggering events.
Send an SNMP Trap: Check this option to send an SNMP trap message upon specific
alarm triggering events.
If you uncheck the
Restart Computer
the
For the MIB structure of TK-IP101, please refer to the followings: (you can also find it in the form of a
TK-IP101-MIB.txt
file,
TK-IP101-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
DisplayString
FROM RFC1213-MIB;
prosum
OBJECT IDENTIFIER ::= { enterprises 997 }
products
OBJECT IDENTIFIER ::= { prosum 5 }
kvmIP
OBJECT IDENTIFIER ::= { products 4 }
TK-IP101
here
trapInfo
OBJECT IDENTIFIER ::= { TK-IP101 1 } -- typical root for the trap
variables
-- TK-IP101 Object
alertMessage
OBJECT-TYPE
SYNTAX
ACCESS
STATUS
DESCRIPTION
::= { trapInfo 1 }
TK-IP101Name
SYNTAX
ACCESS
STATUS
DESCRIPTION
Enable Alarm
option, you won't trigger any alarm types even if you have checked
Send an E-mail
and
option.
, on the TK-IP101 Support CD-ROM).
OBJECT IDENTIFIER ::= { kvmIP 1 }
DisplayString (SIZE (0..256))
read-only
deprecated
"The text of the alert message."
OBJECT-TYPE
DisplayString (SIZE (0..256))
read-only
deprecated
-- trap numbers can be under
-
-
61
Advertisement
Table of Contents
