Video Server; Default Settings - TRENDnet TK-IP101 User Manual

Hide thumbs Also See for TK-IP101:

Table of Contents

4.4 Video Server – Miscellaneous Settings

for Video Servers

After any setting change, click the

Apply Setting

click

to apply new settings to TK-IP101 immediately.

Filter

Specify the Video Filter Level for the TK-IP101 video server.

Based on the bandwidth availability, you can select one of the three modes of video fileter levels:

High Quality, Low Video

Medium Quality, Low Speed

Low Quality, High Speed

Each of the three video filter levels is adapted to different combination of video quality and bandwidth

requirements. Users can select their preference according to actual video quality preference and network

bandwidth availability. However, there's always a trade off between video quality and response speed when

under limited network bandwidth availability.

High Quality, Low Speed (Light Filter): - This level is recommended for ample bandwidth networking

condition such as LAN or broadband internet. With this setting, the viewer screen will be updated on

minimum amount of video change. This setting will require more bandwidth than the other two filter levels

and video refresh speed will be slower (however, only noticeable when bandwidth is very limited). This filter

provides the best image quality.

Submit

button to save new setting to the TK-IP101 database, and then

Table of Contents