1. Before You Start Package Contents TK-803R/TK-1603R Multi-Language Quick Installation Guide Rack mount kit AC Power Adapter (9V DC, 1A) System Requirements PS/2 or USB Keyboard PS/2 or USB Mouse VGA Compatible Monitor USB/ VGA KVM cables (e.g. TK-CU06, TK-CU10, TK-CU15) Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux and Mac...
2. How to Install 1. Turn OFF all computers and their peripherals, and then disconnect all power cords. 2. Connect the shared PS/2 or USB keyboard, monitor, and PS/2 or USB mouse to the KVM switch's Console Port. (TK-1603R shown) 3.
Page 5
KVM switch. Your installation is now complete. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register register your product Online at: Thank you for choosing TRENDnet.
3. Operation Note: To switch between computers, you can use the front-panel push buttons or the Hot Key commands. LED Indicators Red LED light: KVM cable is connected and PC is powering the KVM switch. Green LED light: Indicates the selected PC port is active, whether the computer is turned on or off.
Page 7
Hot Key Commands A keyboard hot key command consists of three keystrokes: Hot Key command = Scroll Lock + Scroll Lock + Command key(s) After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key again.
Page 8
Quick Reference Sheet for TK-803R/TK-1603R Front-Panel Hot Keys Description Command Buttons TK-803R Scroll Lock Scroll Lock + Press the Push Button Select the active PC for a specific port to Select PC TK-1603R channel switch to that port Scroll Lock Scroll Lock + (YZ)= 2-digit channel number - - -...
Technical Specifications TK-803R: 8 computers Management: TK-1603R: 16 computers 1 x USB keyboard Type A 1 x USB mouse Type A Console Port Connectors: 1 x PS/2 keyboard 6-pin mini din female 1 x PS/2 mouse 6-pin mini din female 1 x VGA HDB 15-pin female TK-803R: 8 x VGA HDB 15-pin female...
Go to Section 3 Operation for more information. How to upgrade new firmware to my KVM switch? Please go to the TRENDnet website (www.trendnet.com) to check if there is a new firmware available for your KVM switch and follow the installation procedure to perform the update.
Page 11
TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment.
Page 12
Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt...
Page 13
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.