Table of Contents
Advertisement
If you are hosting multiple TK-IP101 units within your networking environment and you want to allow
external internet access to these multiple TK-IP101 units by using only an external IP together with a set of
dedicated port numbers each for a different TK-IP101 unit ..... then, one usual practice is to configure a set
external access_IP: port_number
internal IP:
of virtual servers on your router so as to map each
pair to an
that is assigned to a specific TK-IP101 unit. Thus, you need only one external IP address to
port number
allow remote clients to login multiple TK-IP101 units only by using different port number mappings.
Use DHCP :
Normally, it is NOT recommended to use the DHCP setting for TK-IP101. However, if you have no
choice but to use DHCP as the only available source for TK-IP101 local IP, you can still have the choice to
check the option to enable it.
This option allows you to configure TK-IP101 as a DHCP client using the IP address
assigned by a DHCP server.
-
-
68
Advertisement
Table of Contents
