Table of Contents
Advertisement
It is wise to backup your configuration files periodically so that you will aCClways be
free from risk of being required to configure TK-IP101 anew when you have lost
your configuration or when you have to configure another unit of TK-IP101 with the
same configuration like one that you have used.
To upload the configuration file to TK-IP101 .....
File Path : Just browse to the location of the update file (*.tgz) and then click the
UPLOAD button.
A running progress indicator bar will be running then to indicate the upload process
is running. Depending on the configuration file size and also the bandwidth
availability across the network, file upload time could vary. When the upload process
is complete, the progress bar will stop running and TK-IP101 will reboot by itself.
To backup the configuration file from TK-IP101 .....
Just click the BACKUP button and then you'll see a file download prompt. Choose the
location for saving your configuration file (*.tgz), and then click Save to save your
configuration backup file to where you want.
Emergency Reboot
In most of the cases, you don't need to use this emergency reboot button to restart
your TK-IP101. Normally, you should use the Apply Settings button on the Apply
Settings Page for almost all the cases of restarting/rebooting TK-IP101 with new
settings. However, if you find the Apply Setting button could not bring the TK-
IP101 to a restart that works properly with the viewer, you can then try to use the
Emergency Reboot button here. But as a rule of thumb, you should try the Apply
Settings button first, before you try the Emergency Reboot button.
-
-
85
Advertisement
Table of Contents
