Playback; Preparations; Turning The Power; Selecting The Input Source - Denon AVR-2309CI Owner's Manual

ENGLISH

Playback

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
SHIFT
<SOURCE SELECT>
PHONES jack
<SOURCE>
<POWER> BAND TUNING
<ON/STANDBY> <SPEAKERS>
[Front]
[ON/SOURCE]
[OFF]
[QUICK SELECT]
SOURCE SELECT
[TUNER]
[MASTER
VOLUME]
SHIFT
TUNING
[CHANNEL + –]
[MUTING]
uiop
[SOURCE
CONTROL 1]
[SOURCE
CONTROL 2]


Preparations

BUTTON
Turning the Power On
<BUTTON>
[BUTTON] 1
<POWER>
Press
The power indicator lights red and the power is set to the
standby mode.
2
<PRESET>
ui <ON/STANDBY>
Press
The power indicator fl ashes green and the power turns on.
b Also press
turns on. In this case the input source is selected by remote
control unit.
b Also press
turns on. In this case Quick Select is selected.
Turning the Power Off
<ON/STANDBY>
q Press
op
The power is set to the standby mode.
<POWER>
w Press
<MASTER VOLUME>
The power indicator turns off, and so does the power.
[Rear]
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, either press
the power, or unplug the power cord from the power outlet.
[TUNER]
• When the multi-zone power is switched on, and you want to switch
[SOURCE
off the main zone power, press
SELECT]
TUNING

Selecting the Input Source

[MODE]
Select the source using
uiop
<SOURCE SELECT>
Turn
[MEMORY]
between input sources.
BAND
If "Rec Select" or "Video Select" is selected, press
<SOURCE SELECT>
turning
.
[ON/SOURCE]
or .
[SOURCE SELECT]
when in standby mode, the power
[QUICK SELECT]
when in standby mode, the power
[OFF]
or .
.
<POWER>
[OFF]
.
SOURCE SELECT
.
[SOURCE SELECT]
or press to switch
<SOURCE>
.

Operations During Playback

Adjusting the Master Volume
<MASTER VOLUME>
Either turn
VOLUME]
.
[Variable range] – – – –80.0dB ~ 18.0dB
NOTE
The adjustable range will differ depending upon factors such as the
type of input signal and the channel level setting.
Turning Off the Sound Temporarily (Muting)
[MUTING]
Press .
• The sound is reduced to the level set at menu "Manual Setup" –
"Option Setup" – "Volume Control" – "Mute Level".
[MUTING]
• To cancel, press again. Muting can also be canceled by
adjusting the master volume.
Listening with Headphones
Plug the headphones into the PHONES jack on the main
to turn off
unit.
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the front speakers
<SPEAKERS>
Press .
Front A
Front A+B
before
NOTE
When you set to "Custom" with "Front Speaker Setup" , you cannot
<SPEAKERS>
operate (vpage 26).
[MASTER
or press
Front B