Status; Main Zone; Zone2; Audio Input Signal - Denon AVR-2309CI Owner's Manual

ENGLISH
Information
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<STATUS>
You can also display current status on the main unit's display each
<STATUS>
time you press .


Status

Shows information about current settings.
BUTTON
F Menu screen F
<BUTTON>
[BUTTON]
5.Information
1.Status

2.Audio Input Signal

3.HDMI Information
4.Auto Surround Mode
5.Quick Select
6.Preset Station
a MAIN ZONE
Shows information about settings for MAIN ZONE.
The items displayed differ according to the input source.
[Items to be checked]
Select Source Name Surround Mode Input Mode
Rec Select Video Select Source Level
Dynamic EQ Dynamic Volume
s ZONE2
Shows information about settings for multi-zone.
[Items to be checked]
Power Select Source
F Menu screen F
5-1.Status
Select Source:TUNER
Name :FM/AM TU
Surround Mode:
STEREO
Input Mode :Analog
1/4
[Items to be checked]
MultEQ
Night Mode RESTORER
etc.
Volume Level
Audio Input Signal
Shows information about audio input signals.
5.Information
5-2.Audio Input Signal
1.Status
2.Audio Input Signal
Surround Mode:
3.HDMI Information
DOLBY DIGITAL EX
4.Auto Surround Mode
5.Quick Select
SIGNAL:Dolby Digital
fs :48kHz
Format:3/2/.1
Offset:-4dB
Surround Mode
: The currently set surround mode is displayed.
SIGNAL
: The input signal type is displayed.
fs
: The input signal's sampling
displayed.
Format
: The number of channels in the input signal (front,
surround, LFE) is displayed.
Offset
: The dialogue normalization correction value is
displayed.
Flag
: "MATRIX" is displayed if the input signal has
undergone matrix processing, "DISCRETE" if the
input signal has undergone discrete processing.
Dialogue normalization function
This is automatically activated when playing Dolby Digital sources.
This function automatically corrects the standard signal level for
individual program sources.
<STATUS>
The correction value can be checked using
The fi gure is the correction value when the standard level is
corrected.
frequency is
.