Installation; Before You Begin - D-Link DIR-605 User Manual

Section 2 - Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the
router in an enclosed area such as a closet, cabinet, or in the attic or garage.
Please configure the router with the computer that was last connected directly to your modem. Also, you can only use
the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off
your modem, disconnect the USB cable and connect an Ethernet cable to the WAN port on the router, and then turn
the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as
WinPoet, Broadjump, or Ethernet 300 from your computer or you will not be able to connect to the Internet.
The device can be mounted on the wall or the partition. To install,
A). Screw the provided screws with
the equipment to the wall or partition
where the device to be placed.
D-Link DIR-605 User Manual

Installation

Before you Begin

Wall Mounting Installation
B). Turn the device, let the bottom
toward to the fixed screws then mount
it in the wall or partition.
C). Using the cables connect to the
back panel.
8