Port Forwarding; D-Link Dir-605 User Manual - D-Link DIR-605 User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Rule:
Check the box to enabled the rule.
Name:
Enter a name for the rule.
IP Address:
Enter the IP address of the computer on
your local network that you want to allow the
incoming service to.
Start Port/
Enter the port or ports that you want to open. If
End Port:
you want to open one port, enter the same port
in both boxes.
Traffic Type: Select TCP, UDP, or Any

D-Link DIR-605 User Manual

Port Forwarding

34