D-Link DIR-605 User Manual page 26

Section 3 - Configuration
Wi-Fi
To implement Wi-Fi protection, or WCN 2.0, tick
Protected
the Enable checkbox, click either Generate New
Setup:
PIN or Reset PIN to Default, and then configure
the Wi-Fi settings below. Please see the Setting
Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
section later in this manual for detailed configuration
information.
Enable Check the box to enable the wireless function. If
Wireless: you do not want to use wireless, uncheck the box
to disable all the wireless functions.
Wireless
Service Set Identifier (SSID) is the name of your
Network Name:
wireless network. Create a name using up to 32
characters. The SSID is case-sensitive.
Indicates the channel setting for the DIR-605. By
Wireless
default the channel is set to 6. The Channel can be
Channel:
changed to fit the channel setting for an existing
wireless network or to customize the wireless
network. The Auto Channel Selection setting can
be selected to allow the DIR-605 to choose the
channel with the least amount of interference.
Transmission
Use the drop-down menu to select the appropriate Transmission Rate in Mbits per second. Many users will want to use the
Rate:
default setting, Best (automatic).
WMM Enable:
Enable Wi-Fi Multimedia to enjoy basic quality of service features. WMM prioritizes traffic according to four access categories:
voice, video, best effort, and background.
Enable Hidden
Check this option if you would not like the SSID of your wireless network to be broadcasted by the DIR-605. If this option is
Wireless:
checked, the SSID of the DIR-605 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID
of your DIR-605 in order to connect to it.
D-Link DIR-605 User Manual 26