Setting Up A Configured Router - D-Link DIR-605 User Manual

Section 6 - Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)

Setting Up a Configured Router

Once the Router has been configured, you can use the push button on the Router or third party software to invite a
newcomer to join your Wi-Fi protected network. For maximum security, the software method is recommended. However,
the push button method is ideal if there is no access to a GUI.
If you are using the Router's Wi-Fi Security push button option, simultaneously depress the push button located on
the side of the Router and the button on the client (or virtual button on the client's GUI). Next click Finish. The Client's
software will then allow a newcomer to join your secure, Wi-Fi protected network.
If you are using third party software, run the appropriate Wi-Fi Protected System utility. You will be asked to either use
the push button method or to manually enter the PIN. Follow the on-screen instructions.
D-Link DIR-605 User Manual 64