D-Link DIR-605 User Manual page 12

Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the WAN port of the D-Link router.
8. You may now use the other three LAN ports to connect other Ethernet devices and computers. To configure your
wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration
and Wireless Security sections for more information on setting up your wireless network.
D-Link DIR-605 User Manual 12