Internet Setup; Static (Assigned By Isp) - D-Link DIR-605 User Manual

Section 3 - Configuration
Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,
gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP
form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
ISP Gateway:
Enter the Gateway assigned by your ISP.
MAC Address:
The default MAC Address is set to the WAN's
physical interface MAC address on the Broadband
Router. It is not recommended that you change
the default MAC address unless required by your
ISP.
Clone MAC
The default MAC address is set to the WAN's
Address:
physical interface MAC address on the Broadband
Router. You can use the Clone MAC Address
button to copy the MAC address of the Ethernet
Card installed by your ISP and replace the WAN
MAC address with the MAC address of the router.
It is not recommended that you change the default
MAC address unless required by your ISP.
Primary DNS
Enter the Primary DNS server IP address
Address:
assigned by your ISP.
This is optional.
Secondary DNS
Address:
Maximum Transmission Unit - you may need to
MTU:
change the MTU for optimal performance with
your specific ISP. 1492 is the default MTU.
D-Link DIR-605 User Manual

Internet Setup

Static (assigned by ISP)

18