D-Link DIR-605 User Manual page 28

Section 3 - Configuration
1. To enable WPA, WPA2, or WPA/WPA2, select
either Enable WPA Only Wireless Security (enhanced),
Enable WPA2 Only Wireless Security (enhanced), or
Enable WPA/WPA2 Wireless Security (enhanced).
2. Next to Cipher Type, select TKIP, AES, or Both.
3. Next to PSK/EAP, select PSK.
4. N e x t N e t w o r k
t o
passphrase. The key is an alpha-numeric
password between 8 and 63 characters long.
The password can include symbols (!?*&_) and
spaces. Make sure you enter this key exactly the
same on all other wireless clients.
5. Click Save Settings to save your settings. If you
are configuring the router with a wireless adapter,
you will lose connectivity until you enable WPA,
WPA2, or WPA/WPA2 (whichever of the three
options you have selected above) on your adapter
and enter the same network key as you did on the
router.
D-Link DIR-605 User Manual
K e y ,
e n t e r a
28