Rear Panel Description; Side Panel Description - D-Link DES-3028 User Manual

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch

Rear Panel Description


The rear panel of the Switch contains an AC power connector. The AC power connector is a standard three-pronged
connector that supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the
male side of the cord into a power outlet. The Switch automatically adjusts its power setting to any supply voltage in the
range from 100 ~ 240 VAC at 50 ~ 60 Hz. The rear panel of the DES-3052/DES-3052P contains one female DCE RS -
232 DB-9 console port.

Side Panel Description

The left and right-hand panel of the DES-3028G/DES-3028/DES-3052 Switches contain heat vents. The heat vents are used to
dissipate heat. Do not block these openings, and leave at least 6 inches of space at the rear and sides of the Switch for proper
ventilation. Be reminded that without proper heat dissipation and air circulation, system components might overheat, which could
lead to system failure.
The sides of the DES-3028P have heat vents to serve to dissipate heat. Do not block these openings, and leave at least 6 inches of
space at the rear and sides of the Switch for proper ventilation. Be reminded that without proper heat dissipation and air
circulation, system components might overheat, which could lead to system failure.
Figure 1- 8. Rear panel view of the DES-3028P
AC LINE
100-240 VAC
50-60 Hz
5A MAX
Figure 1- 9. Rear panel view of the DES-3052P
Figure 1- 10. Rear panel view of the DES-3028G/DES-3028
AC LINE
100-240 VAC
50-60 Hz
0.5A MAX
Figure 1- 11. Rear panel view of the DES-3052
Figure 1- 12. Side panels of the DES-3028G/DES-3028/DES-3052
Console
Console
6