D-Link DES-3028 User Manual page 123

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Figure 7- 23. IGMP Snooping Multicast VLAN Settings – Add window modified
Both the Add and Modify windows of the IGMP Multicast VLAN Settings have the following configurable fields.
Parameter Description
VLAN Name Enter the name of the new Multicast VLAN to be created. This name can be up to 32 characters
in length. This field will display the pre-created name of a Multicast VLAN in the Modify window.
Add or edit the corresponding VLAN ID of the Multicast VLAN. Users may enter a value between
VID
2 and 4094.
State Use the pull-down menu to enable or disable the selected Multicast VLAN.
Member Port Enter a port or list of ports to be added to the Multicast VLAN. Member ports shall be the
untagged members of the multicast VLAN.
Tagged Member Enter a port or list of ports that will become tagged members of the Multicast VLAN.
Port
Source Port Enter a port or list of ports to be added to the Multicast VLAN. Source ports shall be the tagged
members of the multicast VLAN.
This field is used to replace the source IP address of incoming packets sent by the host before
Replace Source
IP being forwarded to the source port.
Click Apply to implement settings made.
To return to the IGMP Snooping Multicast VLAN Entries window, click the
To edit the Group List Settings for a particular entry click the corresponding Modify button, the following window will
Entries.
appear.
hyperlinked Show IGMP Snooping Multicast VLAN
109