802.1P Default Priority - D-Link DES-3028 User Manual

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Parameter
From/To
Type
No Limit
Rate
Click Apply to set the bandwidth control for the selected ports. Results of configured Bandwidth Settings will be displayed in
the Port Bandwidth Table.

802.1p Default Priority

The Switch allows the assignment of a default 802.1p priority to each port on the Switch. To view this window click CoS >
802.1p Default Priority.
Description
A consecutive group of ports may be configured starting with the selected port.
This drop-down menu allows you to select between RX (receive,) TX (transmit,) and Both.
This setting will determine whether the bandwidth ceiling is applied to receiving, transmitting,
or both receiving and transmitting packets.
This drop-down menu allows you to specify that the selected port will have no bandwidth
limit. Enabled disables the limit.
This field allows you to enter the data rate, in Kbit/s, that will be the limit for the selected
port. The user may choose a rate between 64 and 1024000 Kbit/s.
147