Rear Panel Description - D-Link DGS-1210/ME Series Hardware Installation Manual

DGS-1210/ME series Metro Ethernet Switch Hardware Installation Guide
LED Per SFP Port Link/Act
LED Per 10G SFP+
Port
Link/Act
(for DGS-1210-
28X/ME, 28XS/ME)

Rear Panel Description

The rear panel of the Switch contains an AC power connector. The AC power connector is a standard three-
pronged connector that supports the power cord. Plug-in the female connector of the provided power cord
into this socket, and the male side of the cord into a power outlet. The Switch automatically adjusts its power
setting to any supply voltage in the range from 100 to 240 VAC at 50 to 60 Hz. Connect the Kensington-
compatible security lock, at the rear of the switch, to a secure immovable device. Insert the lock into the
notch and turn the key to secure the lock.
DGS-1210-10/ME
DGS-1210-10P/ME
Off Solid Off
Solid
Green
Green
Blinking
Green
Solid Light
Amber
Blinking
Amber
Off Solid off
Solid Light
Green
Blinking
Green
Solid Light
Amber
Blinking
Amber
Off Solid off
Figure 1.15 － DGS-1210-10/ME Rear Panel
Figure 1.16－ DGS-1210-10P/ME Rear Panel
10
No Power feeding.
When there is a secure
1000Mbps Ethernet connection
(or link) at any of the ports.
When there is reception or
transmission (i.e. Activity—Act)
of data occurring at a 1000Mbps
Ethernet connected port.
When there is a secure
100Mbps connection at the port.
(For DGS-1210-28XS/ME only)
When there is reception or
transmission occurring at the
port. (For DGS-1210-28XS/ME
only)
No link.
When there is a secure 10Gbps
connection at the port.
When there is reception or
transmission occurring at the
port.
When there is a secure
1000Mbps connection at the
port.
When there is reception or
transmission occurring at the
port.
No link.