D-Link DES-3028 User Manual page 181

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
The user may search for the settings of a particular Access ID by entering that ID into the Access ID field above and clicking Find.
The user may display all Access ID entries by clicking the View All Entry button.
To remove a previously created rule, select it and click the
locate a specific Access Rule in the table, enter the Access ID and click Find. To display all rules in the table, click the View All
Entries button.
To add a new Access Rule, click the Add button above the Access Rule Table window to view the Access Rule Packet Content
Configuration window.
To set the Access Rule for the Packet Content Mask, adjust the following parameters and click Apply.
Parameter Description
Profile ID This is the identifier number for this profile set.
Mode Select Permit to specify that the Switch, according to any additional rule, forwards the packets
that match the access profile added (see below).
Select Deny to specify that packets that match the access profile are not forwarded by the
Figure 9- 12. Access Rule Table window (Packet Content Mask)
Figure 9- 13. Access Rule Packet Content Configuration window
button. Access rules are indexed using the Access ID number. To
167