Static Vlan Entry - D-Link DES-3028 User Manual

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
VLAN and Trunk Groups
The members of a trunk group have the same VLAN setting. Any VLAN setting on the members of a trunk group will apply to
the other member ports.

Static VLAN Entry

To view this window, click L2 Features > VLAN > Static VLAN Entry which will reveal the following window:
Figure 7- 5. Static VLANs Entry Settings window
The 802.1Q Static VLANs window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an existing
button under the Delete heading.
802.1Q VLAN, click the corresponding
To create a new 802.1Q VLAN, click the Add button in the 802.1Q Static VLANs window. A new window will appear, as
shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a
description of the parameters in the new window.
Figure 7- 6. 802.1Q Static VLANs window - Add
To return to the Current 802.1Q Static VLANs Entries window, click the
Show All Static VLAN Entries link. To change an
existing 802.1Q VLAN entry, click the Modify button of the corresponding entry you wish to modify. A new window will appear
to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a description of
the parameters in the new window.
The following fields can then be set in either the Add or Modify 802.1Q Static VLANs windows:
90