D-Link DES-3028 User Manual page 94

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
The following parameters can be set:
Parameter
VID
Multicast MAC
Address
Port Settings
Click Apply to implement the changes made. To delete an entry in the Static Multicast Forwarding Table, click the corresponding
X under the Delete heading. Click the
Settings window.
Figure 6- 66. Setup Static Multicast Forwarding Table window
Description
The VLAN ID of the VLAN to which the corresponding MAC address belongs.
The MAC address of the static source of multicast packets. This must be a multicast MAC
address.
Allows the selection of ports that will be members of the static multicast group. The options
are:
None - When None is chosen, the port will not be a member of the Static Multicast Group.
Egress - The port is a static member of the multicast group.
Show All Multicast Forwarding Entries
link to return to the Static Multicast Forwarding
80