Installation On Clients - Canon LBP-5100 User Manual

2. In the [Exceptions] sheet in the [Windows Firewall] dialog box, select the [Canon
LBP5100 RPC Server Process] check box, and then click [OK].
• If you installed the CAPT software by any method other than CD-ROM Setup, you need
to configure Windows Firewall to unblock communication with the client computers using
the utility software. (See p. 9-15)

Installation on Clients

This section describes the procedure for installing the printer driver on a client
computer.
There are two ways to install the printer driver: local installation and download
installation.
■ Local Installation (See p. 4-64)
Installing the printer driver using the supplied CD-ROM.
■ Download Installation
Installing the printer driver without using the supplied CD-ROM, but by downloading the
printer driver from the print server. There are the following two ways to download and
install the printer driver:
• Installing from [Add Printer Wizard] (See p. 4-71)
• Installing from [Windows Explorer] (See p. 4-74)
IMPORTANT
• If you are using Windows 2000/XP/Server 2003, be sure to log on as a member of
Administrators when starting up.
Printing from a Network Computer by Sharing the Printer on a Network
4
4-63