Miscellaneous Problems - Canon LBP-5100 User Manual

Miscellaneous Problems

NOTE
For details on problems on installing the optional network board, see "Chapter 4
Troubleshooting" in Network Guide.
LBP5100 does not function properly.
Cause 1
Remedy
Cause 2
Remedy
The printer stops printing temporarily.
7
Cause
Remedy
CD-ROM Setup does not appear automatically. (Windows 98/Me only)
Cause
Remedy
7-54

Miscellaneous Problems

LBP5100 is not specified as the default printer.
Specify it as the default printer.
The CAPT software may not be installed properly.
In order to check if the CAPT software is installed properly, print from an
application. If you cannot print properly, uninstall the CAPT software and install
it again. (See "Uninstalling the CAPT Software," on p. 4-76, "Installing the
CAPT Software," on p. 4-4)
When printing after the paper is changed from narrower one to wider one, the
printer cools down the fixing unit so that the print quality is maintained.
Please wait a moment. The printer cools down the fixing unit automatically.
When the printer finished cooling down the fixing unit, it stops operation and
becomes ready to print. If the printer was in the middle of printing, it resumes
the job after finishing the cool down process.
[Auto insert notification] is not selected.
Display the properties for the CD-ROM drive from [Device Manager] and select
[Auto insert notification] in the [Settings] sheet.