Installing From [Add Printer Wizard]; For Windows Xp/Server 2003 - Canon LBP-5100 User Manual

Installing from [Add Printer Wizard]

NOTE
When installing the CAPT software from [Add Printer Wizard], the USB port for
connecting this printer has to have already been registered.

For Windows XP/Server 2003

If you are using an operating system other than Windows XP/Server 2003, see the
following.
• For Windows 2000 (See p. 4-39)
• For Windows 98/Me (See p. 4-45)
The screen shots used in this section are from Windows XP.
4
IMPORTANT
When printing a test page, make sure that the printer is properly connected to the
computer and the printer is ON before installing the CAPT software.
1
2
3
4-32 Installing the CAPT Software
Turn the computer on and start up Windows XP/Server 2003.
Log on as a member of Administrators.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT software using this procedure.
NOTE
Full Control Permission is required for the installation of the printer driver.
Display the [Printers and Faxes] folder.
For Windows XP Professional/Server 2003: From the [Start] menu, select [Printers
and Faxes].
For Windows XP Home Edition: From the [Start] menu, select [Control Panel], and
then click [Printers and Other Hardware] ➞ [Printers and Faxes].