For Windows 2000 - Canon LBP-5100 User Manual

For Windows 2000

If you are using an operating system other than Windows 2000, see the following.
• For Windows XP/Server 2003 (See p. 4-32)
• For Windows 98/Me (See p. 4-45)
IMPORTANT
When printing a test page, make sure that the printer is properly connected to the
computer and the printer is ON before installing the CAPT software.
1
Turn the computer on and start up Windows 2000.
2
Log on as a member of Administrators.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT software using this procedure.
NOTE
Full Control Permission is required for the installation of the printer driver.
3
From the [Start] menu, select [Settings] ➞ [Printers] to open
the [Printers] folder. Then, double-click [Add Printer].
4
Click [Next].
Installing the CAPT Software
4
4-39