Basic Operation Methods for Scanning
Scanning Documents and Saving Them in a
Computer (USB & Network Connection)
You can scan a document using the keys on the operation
panel.
NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To scan documents by operating a computer
See "Scanning" in the e-Manual.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Keys to be used for this operation
1
Place documents on the platen glass or load them
in the feeder.
"Placing Documents" (→P.2-4)
"Documents Requirements" (→P.2-2)
2
Press [
3
Select <Computer> with [
press [OK].
Select the scan type.
Computer
Remote Scanner
Memory Media
NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
About <Fax (New)>
Select <Fax (New)> in the above screen, and then press [OK]. The fax
sending screen appears. (This is the same state as where [FAX] on the
operation panel is pressed.)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4
Specify a destination with [
then press [OK].
•
When multiple computers are connected
The computer connected by a USB cable is listed on the top.
•
When a computer is connected by a USB cable
This screen is not displayed.
7-2
SCAN
OK
].
] or [
], and then
] or [
], and
* You can change the names for the displayed computers.
e-Manual → Scanning → Using the MF Toolbox
Specify destination.
EXAMPLE1
EXAMPLE2
5
Specify the scanner settings (any of <Scan-1> to
<Scan-4>) with [
] or [
[OK].
The scanner settings are specified by default as follows.
Scan Mode
Resolution
Scan-1
Color
300 dpi
Scan-2
Color
300 dpi
Black and
Scan-3
300 dpi
White
Scan-4
Color
300 dpi
Specify destination.
Scan: Press OK
Color:Scan-1 Compa
Color:Scan-2 JPEG
B&W:Scan-3 TIFF
Scanning operation starts, and then the scan mode screen
reappears after saving the data.
l
?
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you cannot scan
You cannot scan when the setting screen of the MF Toolbox is
displayed.
Click [
] to close the setting screen before scanning.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The location to save the scanned images
The folder where the images are saved opens automatically
after scanning.
By default, the folder of the date when you scanned the data
is created in the [My Pictures] folder in [My Documents].
(For Windows Vista/7, the folder is created in the [Pictures]
folder.)
], and then press
File Type
PDF Settings
Searchable/
PDF
High
JPEG
-
TIFF
-
Searchable/
PDF
Standard