Scanning Documents To A Usb Memory - Canon imageCLASS MF5850dn Basic Operation Manual

Basic Scanning Operations
Scanning Documents to a USB
Memory
This section describes the basic procedure for
storing scanned documents in a USB memory.
1
Insert your USB memory into the USB
memory port.
– Insert the USB memory straight into the USB
memory port. You may damage the USB
memory port if you insert the USB memory at
an angle, or if you insert a USB memory that
does not comply with USB specifications.
– When the USB memory is inserted, the access
indicator turns on. When the access indicator is
blinking, the memory media is being read or
used in other processes. Do not touch the USB
memory or the area surrounding the USB
memory port.
2
Place documents.
8-8
If you want to scan a multi-page document in
color, place it on the ADF.
3
Press [SEND/FAX]/
The SEND/FAX indicator lights up and the
machine enters the send standby mode.
4
Press [SEND/FAX]/
repeatedly to select <USB MEMORY:
B&W> or <USB MEMORY:COLOR>, then
press [OK].
U S B M E M O R Y : B & W
S E L E C T : O K
If you want to start scanning without adjusting
the optional send settings, skip to step 10.
If you want to store color images in the USB
memory, select <USB MEMORY:COLOR> as the
sending method.
5
Press [OK] repeatedly until <FILE
FORMAT> is displayed.
6
Press or
then press [OK].
F I L E F O R M A T
P D F
– USB Memory (B&W): <PDF>, <TIFF(B&W)>
– USB Memory (Color): <PDF(COMPACT)>,
<JPEG>
If you select <JPEG>, skip to step 8.
[FAX].
[FAX]
to select the file format,